topic Adding more logical Devices from Chasis Manager in Network Security

Adding more logical Devices from Chasis Manager

George-Sl — Fri, 21 Feb 2020 17:36:48 GMT

Hello,

I can't add more Logical Devices, what do you think is the issue?

Is there a limit per license, how can I check that?

another question where do we set the this ip address? it's the chassis manager(Gui) interface address

Thx a lot

Re: Adding more logical Devices from Chasis Manager

Marvin Rhoads — Mon, 21 Oct 2019 19:58:42 GMT

Only on the 9300 series can one run multiple logical devices (if you have multiple Security Modules). The 4100 series only support a single logical device as a given time.

Changing the management address used by the chassis itself is done from the cli. See the following:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/fxos271/web-guide/b_GUI_FXOS_ConfigGuide_271/system_administration.html#task_2B7132B9D50D43A1B3BA0C585A36FD6A

While you can technically do it via ssh, I would recommend using the console port for this particular change.