topic Re: Sensor not Taking AC or IDS policy. in Network Security

Sensor not Taking AC or IDS policy.

lmccreery — Fri, 21 Feb 2020 15:16:04 GMT

I have a strange issue that just started. One sensor of many will not successfully install policy. It has to be Defense Center related because I can apply policy to the sensor when registered to a different Defense Center. The errors that I see is mostly have been RPC timeout errors during apply. Health/System/Config all successfully install. Only thing I can think of is that the disk on the sensor had filled up and after clearing space the Defense Center still thinks it is full. Sensor 5.4.0.7 / DC 5.4.1.6

Re: Sensor not Taking AC or IDS policy.

lmccreery — Fri, 16 Feb 2018 17:38:29 GMT

SOLVED:

Create the file /etc/sf/rpc_timeout.conf on the DC and include the following lines:

touch /etc/sf/rpc_timeout.conf

Edit and add these lines:

rpc_timeout 128;

command_timeout 785;

wait_timeout 842;