topic Re: Configure "http redirect 80" in FMC in Network Security

Configure "http redirect 80" in FMC

cmlozano8 — Fri, 21 Feb 2020 15:00:43 GMT

Hi All,

I am struggling with this. I want anyconnect users who accidentally go to http instead of https to be automatically redirected to https. I believe the command "http redirect outside 80" will do this but I can't figure out where to do this in the fmc gui? Has anyone done this? We are using a FP2110.

Any assistance is appreciated.

Chris

Re: Configure "http redirect 80" in FMC

mikael.lahtela — Fri, 22 Dec 2017 12:27:42 GMT

Hi,

Don't know it this is implemented in the gui yet.
If you don't find it you can still try and use flex config to add missing commands.

br, Micke

Re: Configure "http redirect 80" in FMC

Marvin Rhoads — Fri, 22 Dec 2017 12:34:16 GMT

I don't believe that particular feature is supported at this time in FMC. The "http..." command is blacklisted from use with Flexconfig (see below) and, as you noted, not available in the GUI.

https://www.cisco.com/c/en/us/td/docs/security/firepower/622/configuration/guide/fpmc-config-guide-v622/flexconfig_policies.html?bookSearch=true#reference_ztv_qvw_yx

Re: Configure "http redirect 80" in FMC

mikael.lahtela — Fri, 22 Dec 2017 13:07:13 GMT

Nice document Marvin, didn't even know Cisco had a blacklist on that. 🙂

br, Micke

Re: Configure "http redirect 80" in FMC

Nick Ciesinski_ — Wed, 29 Aug 2018 16:27:55 GMT

You can actually workaround the "http" block in FlexConfig

CSCvi81741

"http" is not available for editing in FMC/FTD FlexObject

Workaround:
"htt redirect outside 80" will work.