topic Re: change failover ip in Network Security

change failover ip

khld.saad — Fri, 21 Feb 2020 14:59:33 GMT

can i change fail over IPs by CLI on FTD 2110 .

Re: change failover ip

Marvin Rhoads — Thu, 21 Dec 2017 12:29:31 GMT

Not if you are running the FTD image.

With all FTD platforms the HA configuration must be done from FMC.

Re: change failover ip

khld.saad — Sun, 24 Dec 2017 10:18:03 GMT

how can change it from FMC

Re: change failover ip

Marvin Rhoads — Sun, 24 Dec 2017 10:44:59 GMT

If you have a working HA pair and need to reconfigure the failover address, I believe the only way to change that address is to first "force break" the pair. Then re-form the pair as if you were replacing a secondary unit.

Details for the above are found in the configuration guide here:

https://www.cisco.com/c/en/us/td/docs/security/firepower/622/configuration/guide/fpmc-config-guide-v622/firepower_threat_defense_high_availability.html#id_33798