topic Re: Error on IDM in Network Security https://community.cisco.com/t5/network-security/error-on-idm/m-p/587531#M92887 <HTML><HEAD></HEAD><BODY><P>re-imaged the sensor to 5.0.2 and then updated to 5.0.6 then upgrade the signature </P></BODY></HTML> Wed, 26 Jul 2006 13:05:34 GMT smahbub 2006-07-26T13:05:34Z Error on IDM https://community.cisco.com/t5/network-security/error-on-idm/m-p/587530#M92886 <P></P><P>I have an IDSM-2 with version </P><P> 5.0(2)S152.0 on a 7600 chassis. I am unable to manage the IPS using the IDM. </P><P>When I try to log in, I get the following error </P><P>"Error connecting to sensor. Failed to load sensor-</P><P>errSystemError-ct-sensorApp.487 not responding, please check system</P><P>processes - The connect to the specified lo::ClientPipe failed</P><P></P><P>Exiting IDM"</P><P></P><P>This error comes after it loads the configuration on the IDM.</P><P>I use tcp port 443 to manage the IDSM. It was working fine earlier. This problem cropped</P><P>all of a sudden. I am able to access the IDSM on telnet.</P><P></P><P>Rgds,</P> Sun, 10 Mar 2019 10:06:30 GMT https://community.cisco.com/t5/network-security/error-on-idm/m-p/587530#M92886 yusufidvi 2019-03-10T10:06:30Z Re: Error on IDM https://community.cisco.com/t5/network-security/error-on-idm/m-p/587531#M92887 <HTML><HEAD></HEAD><BODY><P>re-imaged the sensor to 5.0.2 and then updated to 5.0.6 then upgrade the signature </P></BODY></HTML> Wed, 26 Jul 2006 13:05:34 GMT https://community.cisco.com/t5/network-security/error-on-idm/m-p/587531#M92887 smahbub 2006-07-26T13:05:34Z