topic Re: Multiple security contexts and ASA5500 in Network Security https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951749#M937063 <HTML><HEAD></HEAD><BODY><P>Yes as stated earlier, this is true. Even dynamic routing, QoS etc. are not supported in multiple context mode, have a look at the following link:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/contexts.html#wp1116132" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/contexts.html#wp1116132</A></P><P></P><P>Regards</P><P></P><P>Farrukh</P><P></P><P></P></BODY></HTML> Fri, 30 May 2008 10:35:45 GMT Farrukh Haroon 2008-05-30T10:35:45Z Multiple security contexts and ASA5500 https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951747#M937059 <P>Hello, </P><P>I am working on project to replace VPN 3000s with ASA 5500 Series. I want to configure multiple security contexts within a single Cisco ASA 5500 Series appliance, with each context having its own set of security policies, logical interfaces, and administrative domains. </P><P>I read somewhere that multiple context and VPNs don't go together, so looking for better explanation: is it true? </P><P>Any ideas are much appriciated! </P><P>thanks.</P><P></P><P></P> Mon, 11 Mar 2019 12:52:14 GMT https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951747#M937059 pateld 2019-03-11T12:52:14Z Re: Multiple security contexts and ASA5500 https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951748#M937061 <HTML><HEAD></HEAD><BODY><P>yes it's true. you can't use vpn's with multiple contexts.</P></BODY></HTML> Thu, 29 May 2008 17:42:34 GMT https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951748#M937061 srue 2008-05-29T17:42:34Z Re: Multiple security contexts and ASA5500 https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951749#M937063 <HTML><HEAD></HEAD><BODY><P>Yes as stated earlier, this is true. Even dynamic routing, QoS etc. are not supported in multiple context mode, have a look at the following link:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/contexts.html#wp1116132" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/contexts.html#wp1116132</A></P><P></P><P>Regards</P><P></P><P>Farrukh</P><P></P><P></P></BODY></HTML> Fri, 30 May 2008 10:35:45 GMT https://community.cisco.com/t5/network-security/multiple-security-contexts-and-asa5500/m-p/951749#M937063 Farrukh Haroon 2008-05-30T10:35:45Z