topic fpr9300 inter-chassis cluster FMc interface error in Network Security https://community.cisco.com/t5/network-security/fpr9300-inter-chassis-cluster-fmc-interface-error/m-p/3936268#M937758 <P>Hi,</P><P>&nbsp;</P><P>My inter-chassis cluster giving an error on FMC "interface port-channel is not receving any packets" its alerting for 2nd unit in the cluster. I have done trubleshooting and can't find any communication issue but after a certain time it start alerting which kind of seems to be a false alarm, Currently my cluster not in use so is this might be a reason for 2nd unit to keep showing these alerts? my cluster is using ACI leafs or is there any settings I can do there to remove this error?&nbsp;</P> Fri, 21 Feb 2020 17:33:54 GMT khalid.meraj 2020-02-21T17:33:54Z fpr9300 inter-chassis cluster FMc interface error https://community.cisco.com/t5/network-security/fpr9300-inter-chassis-cluster-fmc-interface-error/m-p/3936268#M937758 <P>Hi,</P><P>&nbsp;</P><P>My inter-chassis cluster giving an error on FMC "interface port-channel is not receving any packets" its alerting for 2nd unit in the cluster. I have done trubleshooting and can't find any communication issue but after a certain time it start alerting which kind of seems to be a false alarm, Currently my cluster not in use so is this might be a reason for 2nd unit to keep showing these alerts? my cluster is using ACI leafs or is there any settings I can do there to remove this error?&nbsp;</P> Fri, 21 Feb 2020 17:33:54 GMT https://community.cisco.com/t5/network-security/fpr9300-inter-chassis-cluster-fmc-interface-error/m-p/3936268#M937758 khalid.meraj 2020-02-21T17:33:54Z Re: fpr9300 inter-chassis cluster FMc interface error https://community.cisco.com/t5/network-security/fpr9300-inter-chassis-cluster-fmc-interface-error/m-p/3936303#M937759 <P>Not a cluster answer per se but when I have an HA pair where one member is normally in Standby and not receiving traffic I blacklist the interface traffic check in the Health policy. That's the only way I know of to get rid of the alerts in FMC.</P> Mon, 07 Oct 2019 10:17:26 GMT https://community.cisco.com/t5/network-security/fpr9300-inter-chassis-cluster-fmc-interface-error/m-p/3936303#M937759 Marvin Rhoads 2019-10-07T10:17:26Z