topic Allow EIGRP through a ASA5520 multiple context transparent mode in Network Security https://community.cisco.com/t5/network-security/allow-eigrp-through-a-asa5520-multiple-context-transparent-mode/m-p/1005937#M938108 <P>Is it possible to allow eigrp adjacencies through an ASA5520 in transparent mode (also running multiple context). I'm running software version 7.0(7)</P><P></P><P></P> Mon, 11 Mar 2019 12:41:38 GMT javiercastro 2019-03-11T12:41:38Z Allow EIGRP through a ASA5520 multiple context transparent mode https://community.cisco.com/t5/network-security/allow-eigrp-through-a-asa5520-multiple-context-transparent-mode/m-p/1005937#M938108 <P>Is it possible to allow eigrp adjacencies through an ASA5520 in transparent mode (also running multiple context). I'm running software version 7.0(7)</P><P></P><P></P> Mon, 11 Mar 2019 12:41:38 GMT https://community.cisco.com/t5/network-security/allow-eigrp-through-a-asa5520-multiple-context-transparent-mode/m-p/1005937#M938108 javiercastro 2019-03-11T12:41:38Z Re: Allow EIGRP through a ASA5520 multiple context transparent m https://community.cisco.com/t5/network-security/allow-eigrp-through-a-asa5520-multiple-context-transparent-mode/m-p/1005938#M938109 <HTML><HEAD></HEAD><BODY><P>Yes.</P><P></P><P>From CCO</P><P></P><P>For example, you can establish routing protocol adjacencies through a transparent firewall; you can allow VPN (IPSec), OSPF, RIP, EIGRP, or BGP traffic through based on an extended access list.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml</A></P><P></P><P>HTH</P><P></P><P>Sundar</P></BODY></HTML> Thu, 08 May 2008 00:10:12 GMT https://community.cisco.com/t5/network-security/allow-eigrp-through-a-asa5520-multiple-context-transparent-mode/m-p/1005938#M938109 sundar.palaniappan 2008-05-08T00:10:12Z