topic Re: bridge or tunnel in Network Security https://community.cisco.com/t5/network-security/bridge-or-tunnel/m-p/994993#M938193 <HTML><HEAD></HEAD><BODY><P>Bridge the ATM sub-interface and the respective VLAN.</P><P></P><P>bridge 1 protocol ieee</P><P></P><P>interface atm0/0.1</P><P>bridge-group 1</P><P>atm route-bridged ip</P><P></P><P>Check this link also:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/iosswrel/ps5014/products_feature_guide09186a0080087970.html" target="_blank">http://www.cisco.com/en/US/products/sw/iosswrel/ps5014/products_feature_guide09186a0080087970.html</A></P><P></P><P></P><P> I hope this helps</P><P></P></BODY></HTML> Wed, 07 May 2008 17:13:13 GMT rigoberto.cintron 2008-05-07T17:13:13Z bridge or tunnel https://community.cisco.com/t5/network-security/bridge-or-tunnel/m-p/994992#M938190 <P>need to create a transport for traffic between a ATM sub-interface and a trunked GigabitEthernet. </P><P></P><P>Any ideas?</P> Mon, 11 Mar 2019 12:40:55 GMT https://community.cisco.com/t5/network-security/bridge-or-tunnel/m-p/994992#M938190 rll3 2019-03-11T12:40:55Z Re: bridge or tunnel https://community.cisco.com/t5/network-security/bridge-or-tunnel/m-p/994993#M938193 <HTML><HEAD></HEAD><BODY><P>Bridge the ATM sub-interface and the respective VLAN.</P><P></P><P>bridge 1 protocol ieee</P><P></P><P>interface atm0/0.1</P><P>bridge-group 1</P><P>atm route-bridged ip</P><P></P><P>Check this link also:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/iosswrel/ps5014/products_feature_guide09186a0080087970.html" target="_blank">http://www.cisco.com/en/US/products/sw/iosswrel/ps5014/products_feature_guide09186a0080087970.html</A></P><P></P><P></P><P> I hope this helps</P><P></P></BODY></HTML> Wed, 07 May 2008 17:13:13 GMT https://community.cisco.com/t5/network-security/bridge-or-tunnel/m-p/994993#M938193 rigoberto.cintron 2008-05-07T17:13:13Z