topic Re: Maintenance image version FWSM ? in Network Security https://community.cisco.com/t5/network-security/maintenance-image-version-fwsm/m-p/974701#M938321 <HTML><HEAD></HEAD><BODY><P>Refer to Checking the Maintenance Software section in this link</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/upgrade/guide/fwsm31up.html" target="_blank">http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/upgrade/guide/fwsm31up.html</A> </P><P></P><P>Step 2 ..To boot the FWSM into the maintenance partition, enter the command for your operating system at the switch prompt: </P><P></P><P>â&#128;¢For Cisco IOS, enter the following command: </P><P></P><P>Router# hw-module module mod_num reset cf:1</P><P></P><P>â&#128;¢For Catalyst operating system software, enter the following command: </P><P></P><P>Console&gt; (enable) reset mod_num cf:1</P><P></P><P></P><P></P></BODY></HTML> Fri, 02 May 2008 20:30:14 GMT JORGE RODRIGUEZ 2008-05-02T20:30:14Z Maintenance image version FWSM ? https://community.cisco.com/t5/network-security/maintenance-image-version-fwsm/m-p/974700#M938319 <P>HI,</P><P>How to check the Maintenance image version in a FWSM? DO I have to login in the boot mode? </P><P>I am going to upgrade the FWSM but looks like I have to upgrade the Maintenance image first. </P><P></P><P>Thanks</P> Mon, 11 Mar 2019 12:39:46 GMT https://community.cisco.com/t5/network-security/maintenance-image-version-fwsm/m-p/974700#M938319 rico_hao40 2019-03-11T12:39:46Z Re: Maintenance image version FWSM ? https://community.cisco.com/t5/network-security/maintenance-image-version-fwsm/m-p/974701#M938321 <HTML><HEAD></HEAD><BODY><P>Refer to Checking the Maintenance Software section in this link</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/upgrade/guide/fwsm31up.html" target="_blank">http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/upgrade/guide/fwsm31up.html</A> </P><P></P><P>Step 2 ..To boot the FWSM into the maintenance partition, enter the command for your operating system at the switch prompt: </P><P></P><P>â&#128;¢For Cisco IOS, enter the following command: </P><P></P><P>Router# hw-module module mod_num reset cf:1</P><P></P><P>â&#128;¢For Catalyst operating system software, enter the following command: </P><P></P><P>Console&gt; (enable) reset mod_num cf:1</P><P></P><P></P><P></P></BODY></HTML> Fri, 02 May 2008 20:30:14 GMT https://community.cisco.com/t5/network-security/maintenance-image-version-fwsm/m-p/974701#M938321 JORGE RODRIGUEZ 2008-05-02T20:30:14Z