topic Re: Nat Question in Network Security https://community.cisco.com/t5/network-security/nat-question/m-p/955212#M938483 <HTML><HEAD></HEAD><BODY><P>Not entirely sure i understand what you mean. If you just want to present the data base server with it's own IP </P><P></P><P>static (inside,outside) 192.168.5.1 192.168.5.1 netmask 255.255.255.255</P><P></P><P>where dbase server is on inside interface and 192.168.5.1 is address of dbase server. </P><P></P><P>Jon</P></BODY></HTML> Wed, 30 Apr 2008 05:35:28 GMT Jon Marshall 2008-04-30T05:35:28Z Nat Question https://community.cisco.com/t5/network-security/nat-question/m-p/955211#M938482 <P>Hi,</P><P></P><P> In Data center FWSM, static nat done on Data base server for Branch users. Can branch users access Data base server with original ip( Data base server)?</P> Mon, 11 Mar 2019 12:38:23 GMT https://community.cisco.com/t5/network-security/nat-question/m-p/955211#M938482 sureshkum 2019-03-11T12:38:23Z Re: Nat Question https://community.cisco.com/t5/network-security/nat-question/m-p/955212#M938483 <HTML><HEAD></HEAD><BODY><P>Not entirely sure i understand what you mean. If you just want to present the data base server with it's own IP </P><P></P><P>static (inside,outside) 192.168.5.1 192.168.5.1 netmask 255.255.255.255</P><P></P><P>where dbase server is on inside interface and 192.168.5.1 is address of dbase server. </P><P></P><P>Jon</P></BODY></HTML> Wed, 30 Apr 2008 05:35:28 GMT https://community.cisco.com/t5/network-security/nat-question/m-p/955212#M938483 Jon Marshall 2008-04-30T05:35:28Z