topic Re: Add Port in object group in Network Security

Add Port in object group

ray_stone — Mon, 11 Mar 2019 12:34:13 GMT

Hi, I have make a object-group and add port-objects in the FW. Few ports are added in object group and an access list is also configured that is using object-group. Now I want to add a new port 9800 in object-group.

object-group service Services tcp

description Services assign for Internal DMZ machines from Outside Network access

port-object eq 3389

port-object eq 5000

port-object eq 6565

port-object eq 8800

port-object eq ftp

port-object eq ftp-data

port-object eq www

port-object eq https

port-object eq smtp

access-list outside_access_in remark Servers which will be assess from Public IP for Outside Network

access-list outside_access_in extended permit tcp any object-group Servers object-group Services

Thanks

Re: Add Port in object group

Fernando_Meza — Sun, 20 Apr 2008 09:58:12 GMT

Hi ..

Connect to the firewall by using telnet ( if allowed) or ssh. Enter username and password as requested. Next Type in config t to enter to config mode. Form there type in object-group service Services tcp and then type in port-object eq 9800. Then type in exit twice and test it. Once you are happy then save the changes by typing wr mem

I hope it helps .. please rate helpful posts !!!

Re: Add Port in object group

ray_stone — Sun, 20 Apr 2008 10:28:48 GMT

Thanks!!