topic Reverse proxy rule in Network Security https://community.cisco.com/t5/network-security/reverse-proxy-rule/m-p/992003#M938987 <P>Hi ,</P><P></P><P>I have a PIX 525 E in HSRP (active and standby mode)</P><P></P><P>I have a trusted network attached to Inside interface of noth FW,I have REVERSE PROXY server which is also connected to the DMZ inteface of the both FW.</P><P></P><P>Now my requirement is to give access to the global users to access my servers which is in Trusted area through the REVERSE PROXY,meant the request has to hit the REVERSE proxy,then the reverse proxy has to direct to the servers in the TRUSTED area,then the reply has to again go back to the user through the REVERSE PROXY.</P><P></P><P>I just need to know what NAT and ACL are required to achieve this.</P><P></P><P>Please help me.</P><P></P><P>Thanks and Regards,</P><P></P><P>S.Venkataraman. </P> Mon, 11 Mar 2019 12:33:54 GMT Lavanholy 2019-03-11T12:33:54Z Reverse proxy rule https://community.cisco.com/t5/network-security/reverse-proxy-rule/m-p/992003#M938987 <P>Hi ,</P><P></P><P>I have a PIX 525 E in HSRP (active and standby mode)</P><P></P><P>I have a trusted network attached to Inside interface of noth FW,I have REVERSE PROXY server which is also connected to the DMZ inteface of the both FW.</P><P></P><P>Now my requirement is to give access to the global users to access my servers which is in Trusted area through the REVERSE PROXY,meant the request has to hit the REVERSE proxy,then the reverse proxy has to direct to the servers in the TRUSTED area,then the reply has to again go back to the user through the REVERSE PROXY.</P><P></P><P>I just need to know what NAT and ACL are required to achieve this.</P><P></P><P>Please help me.</P><P></P><P>Thanks and Regards,</P><P></P><P>S.Venkataraman. </P> Mon, 11 Mar 2019 12:33:54 GMT https://community.cisco.com/t5/network-security/reverse-proxy-rule/m-p/992003#M938987 Lavanholy 2019-03-11T12:33:54Z Re: Reverse proxy rule https://community.cisco.com/t5/network-security/reverse-proxy-rule/m-p/992004#M938988 <HTML><HEAD></HEAD><BODY><P>please describe your Q. with interface and ip address of users / reverse proxy / servers. </P><P></P><P>like:</P><P></P><P>pix interface inside 10.0.0.1 /24</P><P>users on insiede 10.0.0.0 /24</P><P></P><P>pix interface reverse proxy ....</P><P></P><P></P><P></P></BODY></HTML> Sat, 19 Apr 2008 18:30:05 GMT https://community.cisco.com/t5/network-security/reverse-proxy-rule/m-p/992004#M938988 ROBERTO TACCON 2008-04-19T18:30:05Z