https://community.cisco.com/t5/network-security/cisco-asa5520-failover-trigger/m-p/947322#M941010 <HTML><HEAD></HEAD><BODY><P>Following links may help you</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1091288" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1091288</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml</A></P></BODY></HTML> Wed, 19 Mar 2008 16:49:05 GMT tstanik 2008-03-19T16:49:05Z https://community.cisco.com/t5/network-security/cisco-asa5520-failover-trigger/m-p/947321#M941009 <P>I have problem with the ASA firewalls failover, when the ether channel between the layer 2 switches are pulled out, this triggers failover on the ASA, the ASA are Active/Standby. </P><P>Please see the attached file for the real architecture this is in visio.</P><P>Also see the failover config below, the Primary firewall has "failover lan unit primary" and the secondary firewall has "failover lan unit secondary"</P><P></P><P>As anyone experienced this before?</P><P></P><P>failover</P><P>failover lan unit primary</P><P>failover lan interface FW_Failover GigabitEthernet0/3</P><P>failover polltime unit msec 500 holdtime 3</P><P>failover link GiFW_Failover GigabitEthernet0/3</P><P>failover interface ip FW_Failover x.x.x.x x.x.x.x standby x.x.x.x </P><P></P><P> </P><P></P> Mon, 11 Mar 2019 12:17:13 GMT https://community.cisco.com/t5/network-security/cisco-asa5520-failover-trigger/m-p/947321#M941009 simi.akinnusi 2019-03-11T12:17:13Z https://community.cisco.com/t5/network-security/cisco-asa5520-failover-trigger/m-p/947322#M941010 <HTML><HEAD></HEAD><BODY><P>Following links may help you</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1091288" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/failover.html#wp1091288</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml</A></P></BODY></HTML> Wed, 19 Mar 2008 16:49:05 GMT https://community.cisco.com/t5/network-security/cisco-asa5520-failover-trigger/m-p/947322#M941010 tstanik 2008-03-19T16:49:05Z