Problem authenticacion user into ACS and Cisco Works

kathy-kat — Fri, 21 Feb 2020 12:08:32 GMT

Hello Everybody!

I have a little problem with an user kcastillo, this is the situation:

1. ACS and CWS LMS are working together.

2. I have an user does not have any privilege called kcastillo and every day at the same hours appears the following message into reports and activity from ACS

Date	Time	Message-Type	User-Name	Group-Name	Caller-ID	Network Access Profile Name	Authen-Failure-Code	Author-Failure-Code	Author-Data	NAS-Port	NAS-IP-Address	Filter Information	PEAP/EAP-FAST-Clear-Name	EAP Type	EAP Type Name	Reason	Access Device	Network Device Group
01/11/2010	11:55:40	Author failed	kcastillo	Monitoreo_CADIVI	10.1.204.7	(Default)	..	Unknown	service=rme authorize-device=10.1.204.7 cmd*DcmaFetchFromDevice	..	10.1.204.7	..	..	..	..	..	SRVW3K11	CiscoWorks

when i saw this problem i thought that could be the devices credentials, so i had to changed that, but does not still work, any idea that what could be the application cdm, because i search and i do not see anything with that name into RME

Re: Problem authenticacion user into ACS and Cisco Works

kathy-kat — Wed, 08 Dec 2010 15:36:19 GMT

Hello!!

I resolved this issue, result that the originally configuration was made for the user kcastillo, but this user with the time lost every privilege, for that reason appears this message into ACS, so i had to make the config again with an user who has enough privileges and the problem was fixed.

topic Problem authenticacion user into ACS and Cisco Works in Network Security

Problem authenticacion user into ACS and Cisco Works

Re: Problem authenticacion user into ACS and Cisco Works