topic Re: Anyconnect vpn group problem in Network Security https://community.cisco.com/t5/network-security/anyconnect-vpn-group-problem/m-p/1272184#M951674 <HTML><HEAD></HEAD><BODY><P>On the security appliance, you can configure authorization that addresses the variables of multiple group membership and endpoint security for VPN connections. There is no specific configuration of AnyConnect required to use dynamic access policies.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/administration/23admin2.html#wp999826" target="_blank">http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/administration/23admin2.html#wp999826</A></P></BODY></HTML> Wed, 08 Jul 2009 23:20:44 GMT brispin 2009-07-08T23:20:44Z Anyconnect vpn group problem https://community.cisco.com/t5/network-security/anyconnect-vpn-group-problem/m-p/1272183#M951673 <P>Hi,</P><P></P><P>I am encountering strange problem with anyconnect vpn. with multiple groups being given different ip address ranges, when user tries to connect, they get subnet mask &amp; gateway which is actually the classful boundary address.</P><P>eg. if a user group needs to get ip from 192.168.0.33 - 96 range, they are seen getting ip from same range but the mask would be default to class c network /24 &amp; gateway would appear as 192.168.0.1. </P><P>The authentication is via ACS and windows domain servers. ACS has groups created.</P><P>Please suggest.</P><P>Thanks.</P> Fri, 21 Feb 2020 11:32:56 GMT https://community.cisco.com/t5/network-security/anyconnect-vpn-group-problem/m-p/1272183#M951673 suthomas1 2020-02-21T11:32:56Z Re: Anyconnect vpn group problem https://community.cisco.com/t5/network-security/anyconnect-vpn-group-problem/m-p/1272184#M951674 <HTML><HEAD></HEAD><BODY><P>On the security appliance, you can configure authorization that addresses the variables of multiple group membership and endpoint security for VPN connections. There is no specific configuration of AnyConnect required to use dynamic access policies.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/administration/23admin2.html#wp999826" target="_blank">http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/administration/23admin2.html#wp999826</A></P></BODY></HTML> Wed, 08 Jul 2009 23:20:44 GMT https://community.cisco.com/t5/network-security/anyconnect-vpn-group-problem/m-p/1272184#M951674 brispin 2009-07-08T23:20:44Z