topic Re: FMC Deployment Time in Network Security

FMC Deployment Time

Vishnu Ravindranath — Fri, 21 Feb 2020 15:54:58 GMT

Hi Team,

In FMC, we are facing an issue with the Deployment Time. Even for a small change (Add a port in a allowed rule, Adding a Static Route) it is taking minimum 5 min. And it can go till 9 to 10 min. Running on the Latest version which is 6.2.3.2.

Any Solution for this behavior.

Thank you,

Vishnu

Re: FMC Deployment Time

Florin Barhala — Tue, 26 Jun 2018 09:05:16 GMT

I would recommend to light up a cigar :).

All jokes aside, except checking your FMC server resource usage while deploying there's little you can do. I just added extra vCPUs to my server after some careful resource monitoring.
As for memory getting from 8 to 12 GB proved of no use.

Re: FMC Deployment Time

Vishnu Ravindranath — Wed, 27 Jun 2018 06:31:59 GMT

I even raised this Concern with Cisco and as per TAC this is the Default behavior and as is now there is no workaround or solution for this,

May be there will be a Enhancement in the Future release.

Thank you,

Vishnu