topic 2 tier security for remote vpn ? in Network Security https://community.cisco.com/t5/network-security/2-tier-security-for-remote-vpn/m-p/1155482#M953321 <P>Hi,</P><P></P><P>I have a cisco PIX 501 in which remote VPN is configured for our company. Currently, for the remote users, the authentication is just a vpn groupname and a password. All the users use the same credentials for logging in. Can I have separate remote vpn users using their own login crentials with a single vpngroup?</P> Fri, 21 Feb 2020 11:28:54 GMT ribin.jones 2020-02-21T11:28:54Z 2 tier security for remote vpn ? https://community.cisco.com/t5/network-security/2-tier-security-for-remote-vpn/m-p/1155482#M953321 <P>Hi,</P><P></P><P>I have a cisco PIX 501 in which remote VPN is configured for our company. Currently, for the remote users, the authentication is just a vpn groupname and a password. All the users use the same credentials for logging in. Can I have separate remote vpn users using their own login crentials with a single vpngroup?</P> Fri, 21 Feb 2020 11:28:54 GMT https://community.cisco.com/t5/network-security/2-tier-security-for-remote-vpn/m-p/1155482#M953321 ribin.jones 2020-02-21T11:28:54Z Re: 2 tier security for remote vpn ? https://community.cisco.com/t5/network-security/2-tier-security-for-remote-vpn/m-p/1155483#M953324 <HTML><HEAD></HEAD><BODY><P>You can configure xauth and utilize local authentication or external authentication via TACACS+ or RADIUS. The doc below is a little dated but provides some good working sample configs.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008010a206.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008010a206.shtml</A></P></BODY></HTML> Wed, 27 May 2009 18:33:03 GMT https://community.cisco.com/t5/network-security/2-tier-security-for-remote-vpn/m-p/1155483#M953324 Todd Pula 2009-05-27T18:33:03Z