topic Re: How to configure Pix 515e vpn to Symantec vpn in Network Security https://community.cisco.com/t5/network-security/how-to-configure-pix-515e-vpn-to-symantec-vpn/m-p/881587#M953596 <HTML><HEAD></HEAD><BODY><P>Get <B>3DES/AES License</B> to enable L2L vpn capabilities, once done refer to bellow link to configure the tunnel..</P><P></P><P>Sample config for l2l vpn, this is PIX to PIX using 7.x code but same principle if running 6.x code, as far as your end is concern you need peer IP address and ipsec information you posted as well as destination host you will be connecting to behind the other end to build tunnel access-list.. but mostly follow example bellow.. if problems after configuration let us know. </P><P></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml</A></P><P></P><P></P><P></P><P><I>Pls rate any helpful post !</I></P><P><I>HTH</I></P><P>Jorge </P></BODY></HTML> Sun, 25 Nov 2007 07:05:45 GMT JORGE RODRIGUEZ 2007-11-25T07:05:45Z How to configure Pix 515e vpn to Symantec vpn https://community.cisco.com/t5/network-security/how-to-configure-pix-515e-vpn-to-symantec-vpn/m-p/881586#M953595 <P>Please can someone give me guide to configure cisco pix 515e for vpn to Symantec firewall:</P><P>The Symantec params:</P><P>DH group 1</P><P>Encryption : 3DES</P><P>Hash: md5</P><P></P><P>Urgent</P> Mon, 11 Mar 2019 11:34:56 GMT https://community.cisco.com/t5/network-security/how-to-configure-pix-515e-vpn-to-symantec-vpn/m-p/881586#M953595 martinvw1 2019-03-11T11:34:56Z Re: How to configure Pix 515e vpn to Symantec vpn https://community.cisco.com/t5/network-security/how-to-configure-pix-515e-vpn-to-symantec-vpn/m-p/881587#M953596 <HTML><HEAD></HEAD><BODY><P>Get <B>3DES/AES License</B> to enable L2L vpn capabilities, once done refer to bellow link to configure the tunnel..</P><P></P><P>Sample config for l2l vpn, this is PIX to PIX using 7.x code but same principle if running 6.x code, as far as your end is concern you need peer IP address and ipsec information you posted as well as destination host you will be connecting to behind the other end to build tunnel access-list.. but mostly follow example bellow.. if problems after configuration let us know. </P><P></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml</A></P><P></P><P></P><P></P><P><I>Pls rate any helpful post !</I></P><P><I>HTH</I></P><P>Jorge </P></BODY></HTML> Sun, 25 Nov 2007 07:05:45 GMT https://community.cisco.com/t5/network-security/how-to-configure-pix-515e-vpn-to-symantec-vpn/m-p/881587#M953596 JORGE RODRIGUEZ 2007-11-25T07:05:45Z