https://community.cisco.com/t5/network-security/firepower-chassis-restart/m-p/3401297#M954032 <P>I have Firepower 2110, I logged into the ASA sitting on top of FXOS using connect asa command and did a reload. After issuing the reload the FPR Chassis also restarted, why is that so because my understanding was that Firepower Chassia and ASA OS are 2 different OS operating on same hardware.&nbsp;</P> Fri, 21 Feb 2020 15:53:37 GMT ring zer0 2020-02-21T15:53:37Z https://community.cisco.com/t5/network-security/firepower-chassis-restart/m-p/3401297#M954032 <P>I have Firepower 2110, I logged into the ASA sitting on top of FXOS using connect asa command and did a reload. After issuing the reload the FPR Chassis also restarted, why is that so because my understanding was that Firepower Chassia and ASA OS are 2 different OS operating on same hardware.&nbsp;</P> Fri, 21 Feb 2020 15:53:37 GMT https://community.cisco.com/t5/network-security/firepower-chassis-restart/m-p/3401297#M954032 ring zer0 2020-02-21T15:53:37Z https://community.cisco.com/t5/network-security/firepower-chassis-restart/m-p/3403367#M954033 Depends on type of your setup, it could be 2 systems on one device, ASA + SFR (Firepower) or it could be FTD (Thread defense). 2110 is coming mostly with FTD image (you can order the one you need during purchase), so one system Thu, 21 Jun 2018 14:27:23 GMT https://community.cisco.com/t5/network-security/firepower-chassis-restart/m-p/3403367#M954033 Abdullo Salikhov 2018-06-21T14:27:23Z