topic Re: ASDM config troubles in Network Security

ASDM config troubles

azore2007 — Mon, 11 Mar 2019 12:06:23 GMT

Im running into a smaller problem when trying to reach my ASDM interface on my ASA5510

My logs tells me this

Through-the-device packet to/from management-only network is denied: tcp src outside:192.168.10.37/6545 dst mgmt:192.168.10.44/443

This is my conf:

interface Ethernet0/0

speed 100

duplex full

nameif outside

security-level 0

ip address 192.168.10.52 255.255.254.0

interface Ethernet0/0.1

vlan 1

nameif mgmt

security-level 10

ip address 192.168.26.1 255.255.255.0

management-only

static (mgmt,outside) 192.168.10.44 192.168.26.1 netmask 255.255.255.255

I also opened up my outside ACL for "permit ip any host 192.168.10.44"

and also created a MGMT ACL for the subinterface with "permit ip any any"

Anyone got a hint what I have done wrong?

Thank you

abinjola — Thu, 21 Feb 2008 18:23:35 GMT

what kind of license you have ?

You need to have security plus and enable management interface to pass traffici through

azore2007 — Fri, 22 Feb 2008 09:20:24 GMT

Hi!

Im running Base license. (ASA5510-BUN-K9)

Cisco ASA 5510 Appliance (Chassis, Software, 50 VPN Peers, Four Fast Ethernet Interfaces, 3DES/AES)

show version tells me this:

Licensed features for this platform:

Maximum Physical Interfaces : Unlimited

Maximum VLANs : 50

Hmm.. Arent Vlans included in this license?

Or do I have to buy the security + licenses just for VLAN?

Cisco ASA 5510 Security Plus License (150 VPN Peers, Active/Standby HA, VLAN)

Thank you