topic asa - dot1q-switch in Network Security

asa - dot1q-switch

cisvects — Mon, 11 Mar 2019 11:54:59 GMT

Hi there

I have a small project to set up mini-hosting on ISP hosting space.

I thought to use cisco asa and swicth, connect them by dot1q, put every web server on own vlan.

My questions are:

1. can I implement that on asa/swicth configuration?

2. is there something similar to committed access rate (car) on asa?

3. should I use something else?

Thanks, vects.

Re: asa - dot1q-switch

JORGE RODRIGUEZ — Tue, 29 Jan 2008 21:35:14 GMT

Serge,

Sure you can use 802.1q trunking between asa and external switch provided you have created vlans on switch and subinterfaces on asa respectvately.

As far as Im aware there is not support for car on asa.You will need to implemnent this on switch with code that supports car.

Rgds

Jorge

Re: asa - dot1q-switch

cisvects — Wed, 30 Jan 2008 09:19:03 GMT

Hi,

Is there another way to rate limit traffic by asa per vlan?

Do I need Layer3 switch for that?

Re: asa - dot1q-switch

ohanusi2000 — Wed, 30 Jan 2008 12:34:58 GMT

If you are running version 7 and above you can policy the traffic, by creating a clas-map, match this to the access-list specifing the traffice in question and apply this to your policy map on that intreface .

Regards