topic Re: Cat 6500 blocking not passing initialization in Network Security https://community.cisco.com/t5/network-security/cat-6500-blocking-not-passing-initialization/m-p/464058#M95634 <HTML><HEAD></HEAD><BODY><P>I think this is not supported on native switch running IOS .</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_guide_chapter09186a008045936a.html" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_guide_chapter09186a008045936a.html</A></P></BODY></HTML> Fri, 12 Aug 2005 19:44:05 GMT thomas.chen 2005-08-12T19:44:05Z Cat 6500 blocking not passing initialization https://community.cisco.com/t5/network-security/cat-6500-blocking-not-passing-initialization/m-p/464057#M95630 <P></P><P>I have 42xx sensor configured to shun on Cat6500. </P><P>I see telnet connection established on Cat6500, but when I look at "show statistics networkAccess" command, instead of geting state=active, I never pass initialization phase. There are regular shun requests shown.</P><P></P><P> AllowSensorShun = false</P><P> ShunMaxEntries = 250</P><P> NetDevice</P><P> Type = CAT6000_VACL</P><P> IP = x.x.x.x</P><P> NATAddr = 0.0.0.0</P><P> Communications = telnet</P><P> ShunInterface</P><P> InterfaceName = 501</P><P> NeverShun</P><P> IP = 192.168.11.10</P><P> IP = 192.168.11.11</P><P> </P><P>State</P><P> ShunEnable = true</P><P> NetDevice</P><P> IP = x.x.x.x</P><P> AclSupport = Uses VACLs</P><P> State = Initializing</P><P></P><P></P><P>Anyone knows what seems to be the problem with this?</P><P></P><P>Thanks</P><P></P><P>Sasa</P> Sun, 10 Mar 2019 09:34:26 GMT https://community.cisco.com/t5/network-security/cat-6500-blocking-not-passing-initialization/m-p/464057#M95630 sasa.rasovic 2019-03-10T09:34:26Z Re: Cat 6500 blocking not passing initialization https://community.cisco.com/t5/network-security/cat-6500-blocking-not-passing-initialization/m-p/464058#M95634 <HTML><HEAD></HEAD><BODY><P>I think this is not supported on native switch running IOS .</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_guide_chapter09186a008045936a.html" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_guide_chapter09186a008045936a.html</A></P></BODY></HTML> Fri, 12 Aug 2005 19:44:05 GMT https://community.cisco.com/t5/network-security/cat-6500-blocking-not-passing-initialization/m-p/464058#M95634 thomas.chen 2005-08-12T19:44:05Z