topic Re: VPN Client not getting network connection in Network Security https://community.cisco.com/t5/network-security/vpn-client-not-getting-network-connection/m-p/1176883#M956820 <HTML><HEAD></HEAD><BODY><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1</A></P><P></P><P>John, </P><P></P><P>Most posible causes could be you need to enable NAT traversal on your firewall .</P><P></P><P>pix(config)#<B>isakmp nat-traversal 20</B></P><P></P><P>If alreayd configured and still RA have no access check your nat exempt access-list to make sure you are allowing RA VPN pool network access to your LAN resources.. </P><P></P><P>Regards</P></BODY></HTML> Tue, 10 Mar 2009 00:15:34 GMT JORGE RODRIGUEZ 2009-03-10T00:15:34Z VPN Client not getting network connection https://community.cisco.com/t5/network-security/vpn-client-not-getting-network-connection/m-p/1176882#M956819 <P>I have configured a VPN client connection in a PIX 506. The VPN client user gets a solid connection to the pix &amp; an IP address assignment from the pool. But he is unable to connect to any address on the local network. </P><P></P><P>John G.</P> Fri, 21 Feb 2020 11:20:26 GMT https://community.cisco.com/t5/network-security/vpn-client-not-getting-network-connection/m-p/1176882#M956819 john.graves 2020-02-21T11:20:26Z Re: VPN Client not getting network connection https://community.cisco.com/t5/network-security/vpn-client-not-getting-network-connection/m-p/1176883#M956820 <HTML><HEAD></HEAD><BODY><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1</A></P><P></P><P>John, </P><P></P><P>Most posible causes could be you need to enable NAT traversal on your firewall .</P><P></P><P>pix(config)#<B>isakmp nat-traversal 20</B></P><P></P><P>If alreayd configured and still RA have no access check your nat exempt access-list to make sure you are allowing RA VPN pool network access to your LAN resources.. </P><P></P><P>Regards</P></BODY></HTML> Tue, 10 Mar 2009 00:15:34 GMT https://community.cisco.com/t5/network-security/vpn-client-not-getting-network-connection/m-p/1176883#M956820 JORGE RODRIGUEZ 2009-03-10T00:15:34Z