topic Smart tunnel access using a dynamic access policy in Network Security https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154759#M956932 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I'm also trying to do the same thing on the latest ASA 8.4 without success.</P><P></P><P>Anyone knows if Cisco is planning to add that feature later on?</P><P></P><P>Thanks.</P></BODY></HTML> Fri, 05 Aug 2011 16:07:20 GMT gabrielcossette 2011-08-05T16:07:20Z Smart tunnel access using a dynamic access policy https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154755#M956928 <P>Is there a way to define a smart tunnel list to a specific dynamic access policy. </P><P></P><P>I need to tunnel different applications depending upon the group users are assigned to within AD. Since the DAP seems to use the DftGrpPolicy, I do not want to define the smart tunnel list on that policy since it would hand it out to all users, but I have been unable to find where this can be added.</P> Fri, 21 Feb 2020 11:20:04 GMT https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154755#M956928 rluyster 2020-02-21T11:20:04Z Re: Smart tunnel access using a dynamic access policy https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154756#M956929 <HTML><HEAD></HEAD><BODY><P>Dynamic access policies (DAP), a new feature introduced in software release v8.0 code of the Adaptive Security Appliance (ASA), enable you to configure authorization that addresses the dynamics of VPN environments. You create a dynamic access policy by setting a collection of access control attributes that you associate with a specific user tunnel or session. These attributes address issues of multiple group membership and endpoint security. </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_white_paper09186a00809fcf38.shtml#t3" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_white_paper09186a00809fcf38.shtml#t3</A></P><P></P></BODY></HTML> Wed, 11 Mar 2009 21:54:54 GMT https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154756#M956929 owillins 2009-03-11T21:54:54Z Re: Smart tunnel access using a dynamic access policy https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154757#M956930 <HTML><HEAD></HEAD><BODY><P>Have you figured this out. I am tring to do the same thing.</P></BODY></HTML> Thu, 14 May 2009 14:38:22 GMT https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154757#M956930 williamelkin 2009-05-14T14:38:22Z Re: Smart tunnel access using a dynamic access policy https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154758#M956931 <HTML><HEAD></HEAD><BODY><P>Sorry to say, but no, I finally set it up to start all the STs on the default policy, not the best solution, but at least it works. </P></BODY></HTML> Thu, 14 May 2009 15:24:07 GMT https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154758#M956931 rluyster 2009-05-14T15:24:07Z Smart tunnel access using a dynamic access policy https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154759#M956932 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I'm also trying to do the same thing on the latest ASA 8.4 without success.</P><P></P><P>Anyone knows if Cisco is planning to add that feature later on?</P><P></P><P>Thanks.</P></BODY></HTML> Fri, 05 Aug 2011 16:07:20 GMT https://community.cisco.com/t5/network-security/smart-tunnel-access-using-a-dynamic-access-policy/m-p/1154759#M956932 gabrielcossette 2011-08-05T16:07:20Z