topic dynamic ip in Network Security https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846756#M957006 <P>is there any way to configure the pix 506e for a dynamic outside IP address</P> Mon, 11 Mar 2019 11:48:28 GMT Danny Guillory Jr 2019-03-11T11:48:28Z dynamic ip https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846756#M957006 <P>is there any way to configure the pix 506e for a dynamic outside IP address</P> Mon, 11 Mar 2019 11:48:28 GMT https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846756#M957006 Danny Guillory Jr 2019-03-11T11:48:28Z Re: dynamic ip https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846757#M957008 <HTML><HEAD></HEAD><BODY><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/pixclnt.html#wp1031753" target="_blank">http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/pixclnt.html#wp1031753</A></P><P></P><P>ip address outside dhcp [setroute] [retry retry_cnt]</P></BODY></HTML> Tue, 15 Jan 2008 18:42:37 GMT https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846757#M957008 srue 2008-01-15T18:42:37Z Re: dynamic ip https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846758#M957009 <HTML><HEAD></HEAD><BODY><P>Yes, the command line would be "ip address outside dhcp setroute"</P><P></P><P>Also, if you are using the Pix 506E to assign DHCP leases to the machines behind it, you might also want to use the "dhcpd auto_config outside" command. This will pass information such as the ISP's DNS servers to the client machines via DHCP.</P><P></P><P>Carl</P><P></P></BODY></HTML> Tue, 15 Jan 2008 18:44:22 GMT https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846758#M957009 1cmerchant 2008-01-15T18:44:22Z Re: dynamic ip https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846759#M957011 <HTML><HEAD></HEAD><BODY><P>is the command actually "ip address outside dhcp setroute" are does set route need to be replaced with something else?</P></BODY></HTML> Tue, 15 Jan 2008 21:33:55 GMT https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846759#M957011 Danny Guillory Jr 2008-01-15T21:33:55Z Re: dynamic ip https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846760#M957012 <HTML><HEAD></HEAD><BODY><P>If the outside interface receives a dynamic address, then the 'setroute' parameter is required in order for the device to know where it should send next hop packets. Although it is possible to manually set the route, it doesn't make sense to do it that way since the next hop could possibly change.</P></BODY></HTML> Fri, 18 Jan 2008 13:45:46 GMT https://community.cisco.com/t5/network-security/dynamic-ip/m-p/846760#M957012 1cmerchant 2008-01-18T13:45:46Z