topic Re: ASDM 6 bugs in Network Security

ASDM 6 bugs

acomiskey — Mon, 11 Mar 2019 11:48:25 GMT

Upgraded ASA to 8 with ASDM 6 and noticed the following oddities in the new ASDM.

Configuration -> Remote Access VPN -> IPSec Connection Profiles -> Enable interfaces for IPsec access. The checkbox for outside is not checked even though it is enabled.

Configuration -> Site to Site VPN -> Connection Profiles. Only 1 of my tunnel groups is showing up in the list even though there are 3 in the config.

Re: ASDM 6 bugs

acomiskey — Wed, 16 Jan 2008 14:53:08 GMT

Found another one...

Configuration -> Site to Site VPN -> Connection Profiles. The 1 tunnel group which is showing up says IPsec protocol is Disabled. This is not true.

Anyone else see these issues after going to 8?

Re: ASDM 6 bugs

acomiskey — Thu, 17 Jan 2008 19:44:44 GMT

...and another one...

Monitoring -> VPN Statistics -> Sessions -> Bytes TX/RX

The byte counter used to add all of the ipsec sessions together, now it seems to just pick one. For example, if I have multiple interesting traffic acl's defined for a site to site tunnel, ASDM 5 would add all the traffic together. ASDM 6 just seems to pick one of the acl's.

I want ASDM 5 back!