topic Re: Force FWSM Failover in Network Security https://community.cisco.com/t5/network-security/force-fwsm-failover/m-p/838628#M957108 <HTML><HEAD></HEAD><BODY><P>This is not possible. The FWSM failover works on its own protocol to detect a failure of the peer.</P></BODY></HTML> Tue, 22 Jan 2008 17:20:19 GMT tstanik 2008-01-22T17:20:19Z Force FWSM Failover https://community.cisco.com/t5/network-security/force-fwsm-failover/m-p/838627#M957102 <P>Is it possible for me to setup a custom monitoring so that if a particular IP does not respond, a failover can occur?</P> Mon, 11 Mar 2019 11:47:37 GMT https://community.cisco.com/t5/network-security/force-fwsm-failover/m-p/838627#M957102 cisconoobie 2019-03-11T11:47:37Z Re: Force FWSM Failover https://community.cisco.com/t5/network-security/force-fwsm-failover/m-p/838628#M957108 <HTML><HEAD></HEAD><BODY><P>This is not possible. The FWSM failover works on its own protocol to detect a failure of the peer.</P></BODY></HTML> Tue, 22 Jan 2008 17:20:19 GMT https://community.cisco.com/t5/network-security/force-fwsm-failover/m-p/838628#M957108 tstanik 2008-01-22T17:20:19Z