topic Re: ASA 5510 Add 2nd ISP in Network Security https://community.cisco.com/t5/network-security/asa-5510-add-2nd-isp/m-p/829511#M958179 <HTML><HEAD></HEAD><BODY><P>As far as I know the ability to route traffic based on traffic type is what we generally identify as Policy Based Routing. I believe that PBR is an IOS functionality but is not implemented on the ASA.</P><P></P><P>HTH</P><P></P><P>Rick</P></BODY></HTML> Fri, 21 Dec 2007 11:54:05 GMT Richard Burts 2007-12-21T11:54:05Z ASA 5510 Add 2nd ISP https://community.cisco.com/t5/network-security/asa-5510-add-2nd-isp/m-p/829510#M958178 <P>On my ASA 5510 we currently have a single "outside" connection to the Internet. I would like to add an additional connection using the interface ethernet 0/2 using a DSL line already installed in the office. Is it possible to route all http traffic through eth 0/2? I am very concerned about not affecting a site to site VPN or inbound/outbound email that is using the current "outside" connection.</P><P>Thank you for helping.</P><P>hp.</P> Wed, 13 Mar 2019 00:53:43 GMT https://community.cisco.com/t5/network-security/asa-5510-add-2nd-isp/m-p/829510#M958178 halspuppet 2019-03-13T00:53:43Z Re: ASA 5510 Add 2nd ISP https://community.cisco.com/t5/network-security/asa-5510-add-2nd-isp/m-p/829511#M958179 <HTML><HEAD></HEAD><BODY><P>As far as I know the ability to route traffic based on traffic type is what we generally identify as Policy Based Routing. I believe that PBR is an IOS functionality but is not implemented on the ASA.</P><P></P><P>HTH</P><P></P><P>Rick</P></BODY></HTML> Fri, 21 Dec 2007 11:54:05 GMT https://community.cisco.com/t5/network-security/asa-5510-add-2nd-isp/m-p/829511#M958179 Richard Burts 2007-12-21T11:54:05Z