topic Re: unable ping in Network Security https://community.cisco.com/t5/network-security/unable-ping/m-p/908964#M958576 <HTML><HEAD></HEAD><BODY><P>Make sure the switchport these interfaces belongs to are on their respective vlan.</P><P>On both pixes clear the counters on interfaces, if continue to see runts/crc and other interface errors dounble check duplex on the questioned interfaces on both pixes as well as switchports, if all these are ok and errors are still incrementing replace CAT5 cables.. try that.</P><P></P><P></P><P>Rgds</P><P>Jorge </P></BODY></HTML> Mon, 17 Dec 2007 13:12:17 GMT JORGE RODRIGUEZ 2007-12-17T13:12:17Z unable ping https://community.cisco.com/t5/network-security/unable-ping/m-p/908963#M958575 <P>Hi,</P><P>We have pix 535, 6 interfaces, active stanby mode.In that 2 of the primary pix interfaces unable to ping the same Secondary pix inerfaces and vis versa.In that particular interface status are normal. Even i have checked with rebooting pix also.but i am finding input errors and overrun error in that particular interfaces. Kinldy provide me solution to solve the issue..</P> Wed, 13 Mar 2019 00:51:27 GMT https://community.cisco.com/t5/network-security/unable-ping/m-p/908963#M958575 sureshkum 2019-03-13T00:51:27Z Re: unable ping https://community.cisco.com/t5/network-security/unable-ping/m-p/908964#M958576 <HTML><HEAD></HEAD><BODY><P>Make sure the switchport these interfaces belongs to are on their respective vlan.</P><P>On both pixes clear the counters on interfaces, if continue to see runts/crc and other interface errors dounble check duplex on the questioned interfaces on both pixes as well as switchports, if all these are ok and errors are still incrementing replace CAT5 cables.. try that.</P><P></P><P></P><P>Rgds</P><P>Jorge </P></BODY></HTML> Mon, 17 Dec 2007 13:12:17 GMT https://community.cisco.com/t5/network-security/unable-ping/m-p/908964#M958576 JORGE RODRIGUEZ 2007-12-17T13:12:17Z Re: unable ping https://community.cisco.com/t5/network-security/unable-ping/m-p/908965#M958577 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Thanks.i will let u know the results</P></BODY></HTML> Wed, 19 Dec 2007 07:31:25 GMT https://community.cisco.com/t5/network-security/unable-ping/m-p/908965#M958577 sureshkum 2007-12-19T07:31:25Z Re: unable ping https://community.cisco.com/t5/network-security/unable-ping/m-p/908966#M958578 <HTML><HEAD></HEAD><BODY><P>Although I don't think this is your problem, be sure to check the basics - cabling, speed/duplex. These things can cause lots of interface errors.</P></BODY></HTML> Wed, 19 Dec 2007 13:41:14 GMT https://community.cisco.com/t5/network-security/unable-ping/m-p/908966#M958578 srue 2007-12-19T13:41:14Z