topic http access wont work in Network Security

http access wont work

ggittins — Mon, 11 Mar 2019 11:42:31 GMT

hello newbie question

i am trying to access the web interface of a asa and i put the following commands

and it asks for a username and password

which is not defined on the asa

http server enable

http 172.17.14.138 255.255.255.255 inside

what else do i need?

my telnet and enable pass dont work

JORGE RODRIGUEZ — Tue, 11 Dec 2007 21:42:06 GMT

did you try https:\\FW_ip_address ? when prompted with user name leave blank and enter enable password.

for telnet add in asa:

telnet 172.17.14.138 255.255.255.255 inside

HTH

Jorge

ggittins — Tue, 11 Dec 2007 21:50:42 GMT

thanks that worked. what would be the command

to authenticate locally or to taacas

JORGE RODRIGUEZ — Tue, 11 Dec 2007 22:30:18 GMT

Geroge, glad that worked..

to create user name locally use :

username Joe password xxxxx privilege 15

HTH

Jorge

Please rate post if resolved.