topic Re: Access-list EQ protocols PIX in Network Security

Access-list EQ protocols PIX

thefindjack — Mon, 11 Mar 2019 11:41:33 GMT

Anybody know where I can find a summary list of protocols you can specify using the "eq" command at the end of an acl?

Re: Access-list EQ protocols PIX

Alan Huseyin Kayahan — Mon, 10 Dec 2007 17:50:44 GMT

Hi David

Write your ACL

(Example)

access-list outside_access_in permit tcp any host TEST eq

Then type ?

List of available options will appear

Regards

Re: Access-list EQ protocols PIX

thefindjack — Mon, 10 Dec 2007 17:56:21 GMT

Think before you post please, try it on a PIX/ASA and tell me what happens for you. Thanks

Anybody know or have found a link for this?

Re: Access-list EQ protocols PIX

vanagon2tdi — Mon, 10 Dec 2007 18:18:45 GMT

PIX-01(config)# access-li 101 exte permi tcp any host 10.1.1.10 eq ?

configure mode commands/options:

<1-65535> Enter port number (1 - 65535)

aol

bgp

chargen

cifs

citrix-ica

cmd

ctiqbe

daytime

discard

domain

echo

exec

finger

ftp

ftp-data

gopher

h323

Hmmm works for me? Version 8.03

Re: Access-list EQ protocols PIX

Alan Huseyin Kayahan — Mon, 10 Dec 2007 18:21:22 GMT

Hi dave

As I understood after the askers arrogant reply, he wants short descriptions about the commands that ? after eq lists. Now googling maybe I can help.

Regards

Re: Access-list EQ protocols PIX

Alan Huseyin Kayahan — Mon, 10 Dec 2007 18:41:24 GMT

David

I think following is the most authoritive link (IANA) . All available Services listed in the link. But Cisco has about 100 predefined services. You can search for the Service in ASA you want to learn about in the following link

http://www.iana.org/assignments/port-numbers

I hope it helps

Regards

Re: Access-list EQ protocols PIX

blubericisco — Mon, 10 Dec 2007 20:47:50 GMT

Works here to.. ASA5510 w/ 7.2(3)