topic Installing PIX license in Network Security https://community.cisco.com/t5/network-security/installing-pix-license/m-p/866724#M960218 <P>Hi,</P><P></P><P>Our secondary firewall crashed couple of days ago and we already got the replacement firewall. We are using PIX515E. I already got the license key from Cisco. What should I do first? Should I upgrade the PIX version first (because I needed to match the primary), install the additional NIC card, then install the license? Or the order doesn't really matter? Thanks.</P><P></P><P>John</P> Mon, 11 Mar 2019 11:34:05 GMT jpl861 2019-03-11T11:34:05Z Installing PIX license https://community.cisco.com/t5/network-security/installing-pix-license/m-p/866724#M960218 <P>Hi,</P><P></P><P>Our secondary firewall crashed couple of days ago and we already got the replacement firewall. We are using PIX515E. I already got the license key from Cisco. What should I do first? Should I upgrade the PIX version first (because I needed to match the primary), install the additional NIC card, then install the license? Or the order doesn't really matter? Thanks.</P><P></P><P>John</P> Mon, 11 Mar 2019 11:34:05 GMT https://community.cisco.com/t5/network-security/installing-pix-license/m-p/866724#M960218 jpl861 2019-03-11T11:34:05Z Re: Installing PIX license https://community.cisco.com/t5/network-security/installing-pix-license/m-p/866725#M960219 <HTML><HEAD></HEAD><BODY><P>Hi John, I would suggest to for 1st step install the NICS and lincese in any order it does not matter. 2nd upgrade code to match primary PIX code , and your final step connect failover cable for failover configuration sync at least at this stage you will have all physical and code matches before failover cable connections.</P><P></P><P>HTH</P><P>Jorge </P><P></P><P></P></BODY></HTML> Wed, 21 Nov 2007 21:37:17 GMT https://community.cisco.com/t5/network-security/installing-pix-license/m-p/866725#M960219 JORGE RODRIGUEZ 2007-11-21T21:37:17Z