https://community.cisco.com/t5/network-security/acs-server-unknown-user-enable-password/m-p/1133517#M964320 <HTML><HEAD></HEAD><BODY><P>A separate enable password for TACACS+ works well in CiscoSecure ACS version 3.3.3 and earlier. This problem occurs with CiscoSecure ACS version 4.0(1.27).</P><P></P><P>An enable password will allow a user to carry out expanded system administrator-level EXEC operations in CiscoSecure ACS 2.3</P><P></P><P>The following URL helps to specify an enable password for a given user: </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps4911/products_user_guide_chapter09186a00803deb43.html#wp1016447" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps4911/products_user_guide_chapter09186a00803deb43.html#wp1016447</A></P><P></P></BODY></HTML> Mon, 29 Sep 2008 22:17:29 GMT smalkeric 2008-09-29T22:17:29Z https://community.cisco.com/t5/network-security/acs-server-unknown-user-enable-password/m-p/1133516#M964319 <P>we are using external user DB to log into the Network devices to authenetication.</P><P>I want set enable password on the ACS, I found from ACS server configuration page:</P><P>"Configure Enable Password Behaviour:</P><P></P><P>For newly created dynamic users, the TACACS+ enable password is authenticated against:</P><P> </P><P> The internal database. </P><P> /or The database in which the user profile is held. </P><P>" </P><P>which one i should choose and how to set the enable password for user? thanks</P> Fri, 21 Feb 2020 11:01:02 GMT https://community.cisco.com/t5/network-security/acs-server-unknown-user-enable-password/m-p/1133516#M964319 shibindong 2020-02-21T11:01:02Z https://community.cisco.com/t5/network-security/acs-server-unknown-user-enable-password/m-p/1133517#M964320 <HTML><HEAD></HEAD><BODY><P>A separate enable password for TACACS+ works well in CiscoSecure ACS version 3.3.3 and earlier. This problem occurs with CiscoSecure ACS version 4.0(1.27).</P><P></P><P>An enable password will allow a user to carry out expanded system administrator-level EXEC operations in CiscoSecure ACS 2.3</P><P></P><P>The following URL helps to specify an enable password for a given user: </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps4911/products_user_guide_chapter09186a00803deb43.html#wp1016447" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps4911/products_user_guide_chapter09186a00803deb43.html#wp1016447</A></P><P></P></BODY></HTML> Mon, 29 Sep 2008 22:17:29 GMT https://community.cisco.com/t5/network-security/acs-server-unknown-user-enable-password/m-p/1133517#M964320 smalkeric 2008-09-29T22:17:29Z