ASDM stop working after http L7 inspection

uzair.infotech — Fri, 21 Feb 2020 15:33:45 GMT

Hello Guys,

I am using Cisco ASA 5512-X firewall for my office. I was accessing it through ASDM before implementing the http L7 inspection. After implementation of it i can't access my firewall through ASDM.

If i remove the inspect http http-inspect-Pmap command in policy-map global_polciy then i can access the ASDM.

Please help me.

policy-map type inspect http http-inspect-Pmap
parameters
protocol-violation action drop-connection log
match req-resp content-type mismatch
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect icmp error

inspect http http-inspect-Pmap
class class-default
user-statistics accounting
!
service-policy global_policy global

Re: ASDM stop working after http L7 inspection

Mohammed al Baqari — Mon, 26 Mar 2018 12:31:19 GMT

-##Enable term mon on the firewall and see what are you matching. You can
exclude adsm traffic from class match

topic ASDM stop working after http L7 inspection in Network Security

ASDM stop working after http L7 inspection

Re: ASDM stop working after http L7 inspection