topic Re: IDSMC Database please help in Network Security https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369230#M96665 <HTML><HEAD></HEAD><BODY><P>I have attached a screen shot of the log in question. I cannot get them to shrink or prune. I have tried removing them and my IDSMC does not even start up any more. Please any help would be greatly appreciated. </P><P></P><P> </P><P></P></BODY></HTML> Mon, 28 Mar 2005 16:41:18 GMT allen.external 2005-03-28T16:41:18Z IDSMC Database please help https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369229#M96664 <P>Oh please somebody help. My database has grown way to big. My drive space is full. Is there some where I can delete my database? Is there some place I can tell IDSMC to save on its database on my D drive instead of my C drive? I am desperate. Please somebody help. </P> Sun, 10 Mar 2019 09:21:26 GMT https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369229#M96664 allen.external 2019-03-10T09:21:26Z Re: IDSMC Database please help https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369230#M96665 <HTML><HEAD></HEAD><BODY><P>I have attached a screen shot of the log in question. I cannot get them to shrink or prune. I have tried removing them and my IDSMC does not even start up any more. Please any help would be greatly appreciated. </P><P></P><P> </P><P></P></BODY></HTML> Mon, 28 Mar 2005 16:41:18 GMT https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369230#M96665 allen.external 2005-03-28T16:41:18Z Re: IDSMC Database please help https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369231#M96666 <HTML><HEAD></HEAD><BODY><P>I found the answer. Thanks for your help guys. Dont too many people reply at once.:^P</P><P></P><P>For those of you that want to know here you go. Also this assumes that cisco works is installed in the C:/Program Files dir. and you are using VMS 2.0 </P><P></P><P>1. Navagte to the following location Via CMD prompt.</P><P>C:/program files/CSCOpx/MDC/bin/ids </P><P></P><P>2. Issue command "IdsAlarms -d -z" and wait about 30min to an hour. You will know it is done when you are back to the C:/program files/CSCOpx/MDC/bin/ids command prompt again.</P><P></P><P>3. Issue the command "net stop crmdmgtd" and Wait till Cisco Works stops</P><P></P><P>4. Iusse the command "IdsDbCompact -r" Wait another 30min to an hour for this to complete. You will know it is done when you are back to the C:/program files/CSCOpx/MDC/bin/ids command prompt again. </P><P></P><P>(note; if you dont have room on the hard drive you might need to specify a path to another drive see url <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mon_sec/secmon12/ug/ch07.htm#131294" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mon_sec/secmon12/ug/ch07.htm#131294</A> )</P><P></P><P>5. Issue the command "net start crmdmgtd" and Wait till Cisco Works starts.</P><P></P><P>6. Log into cisco works then go to ServerConfig&gt;Admin&gt;Process Management&gt;Start Process and click on the radio button next to system and click finish.</P><P></P><P></P></BODY></HTML> Tue, 29 Mar 2005 18:20:18 GMT https://community.cisco.com/t5/network-security/idsmc-database-please-help/m-p/369231#M96666 allen.external 2005-03-29T18:20:18Z