topic IPS Functionality in IDS 4215 in Network Security https://community.cisco.com/t5/network-security/ips-functionality-in-ids-4215/m-p/335978#M96745 <P>Can I have all IPS functionality in my 4215 after upgrading its software to 5.0</P> Sun, 10 Mar 2019 09:20:27 GMT farough_ahmed 2019-03-10T09:20:27Z IPS Functionality in IDS 4215 https://community.cisco.com/t5/network-security/ips-functionality-in-ids-4215/m-p/335978#M96745 <P>Can I have all IPS functionality in my 4215 after upgrading its software to 5.0</P> Sun, 10 Mar 2019 09:20:27 GMT https://community.cisco.com/t5/network-security/ips-functionality-in-ids-4215/m-p/335978#M96745 farough_ahmed 2019-03-10T09:20:27Z Re: IPS Functionality in IDS 4215 https://community.cisco.com/t5/network-security/ips-functionality-in-ids-4215/m-p/335979#M96748 <HTML><HEAD></HEAD><BODY><P>The short answer is "it depends..."</P><P></P><P>If your sensor is equiped with the 4FE expansion card (Cisco part no. IDS-4FE-INT=), you can.</P><P></P><P>If it isn't so equiped, you will have to add one in order to use the in-line features.</P><P></P><P>I hope this helps,</P><P>Alex Arndt</P></BODY></HTML> Thu, 17 Mar 2005 16:50:23 GMT https://community.cisco.com/t5/network-security/ips-functionality-in-ids-4215/m-p/335979#M96748 a.arndt 2005-03-17T16:50:23Z