ASA 8.2 dynamic PAT not working

Jleht — Fri, 21 Feb 2020 15:28:13 GMT

I am setting up a 5505 in a lab environment.

I am running 8.2 and trying to get the PAT to function correctly.

I tried using the Wizard, setting it to use the interface, and tried it in the cli

I have put in the global command and both the inside and outside statements have the same id.

In ASDM, the outside address shows up in the NAT statement

When I run packet tracer, it says the inside has no global command associated with it. It does hit the NAT correctly. Everything else passes

Dynamic translation to pool 20 (no matching global)

Config:

nat (inside) 20 [network ip] [subnet]

global (outside) 20 interface

it confirms when I type it in that it is using dynamic PAT.

What am I missing!

Re: ASA 8.2 dynamic PAT not working

Ajay Saini — Mon, 05 Mar 2018 05:30:53 GMT

Hello,

Please attach output of below commands:

show run nat

show run global

show run static

also, attach the packet-tracer command and output you get.