topic cannot receive message from ASA 5505 b syslog server? in Network Security https://community.cisco.com/t5/network-security/cannot-receive-message-from-asa-5505-b-syslog-server/m-p/1353718#M969164 <P>Dear All,</P><P></P><P>I have some problem on Syslog server. i was enable command as below for syslog server:</P><P>logging enable<BR />logging timestamp<BR />logging buffer-size 409600<BR />logging console critical<BR />logging monitor debugging<BR />logging buffered warnings<BR />logging trap informational<BR />logging history informational<BR />logging asdm informational<BR />logging host inside 192.168.7.10 6/0<BR />logging debug-trace</P><P></P><P></P><P>But my syslog server did not receive message from ASA 5505....</P><P>I don't what is going on? </P><P>Do you have any command on this?</P><P></P><P>Best Regards,</P><P>Rechard</P> Fri, 21 Feb 2020 11:52:25 GMT rechard_hk 2020-02-21T11:52:25Z cannot receive message from ASA 5505 b syslog server? https://community.cisco.com/t5/network-security/cannot-receive-message-from-asa-5505-b-syslog-server/m-p/1353718#M969164 <P>Dear All,</P><P></P><P>I have some problem on Syslog server. i was enable command as below for syslog server:</P><P>logging enable<BR />logging timestamp<BR />logging buffer-size 409600<BR />logging console critical<BR />logging monitor debugging<BR />logging buffered warnings<BR />logging trap informational<BR />logging history informational<BR />logging asdm informational<BR />logging host inside 192.168.7.10 6/0<BR />logging debug-trace</P><P></P><P></P><P>But my syslog server did not receive message from ASA 5505....</P><P>I don't what is going on? </P><P>Do you have any command on this?</P><P></P><P>Best Regards,</P><P>Rechard</P> Fri, 21 Feb 2020 11:52:25 GMT https://community.cisco.com/t5/network-security/cannot-receive-message-from-asa-5505-b-syslog-server/m-p/1353718#M969164 rechard_hk 2020-02-21T11:52:25Z Re: cannot receive message from ASA 5505 b syslog server? https://community.cisco.com/t5/network-security/cannot-receive-message-from-asa-5505-b-syslog-server/m-p/1353719#M969165 <HTML><HEAD></HEAD><BODY><P>Why did you put the /0 after the logging host command?</P><P></P><P>Just put logging host inside <IP></IP></P><P></P><P>Have a look at this lnk:</P><P></P><P><A class="jive-link-external-small" href="http://ciscosystems.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml">http://ciscosystems.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml</A></P><P></P><P>Please rate if helpful.</P><P></P><P>Regards</P><P>Farrukh</P></BODY></HTML> Tue, 09 Feb 2010 11:20:52 GMT https://community.cisco.com/t5/network-security/cannot-receive-message-from-asa-5505-b-syslog-server/m-p/1353719#M969165 Farrukh Haroon 2010-02-09T11:20:52Z