topic Re: ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules in Network Security

ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules

M Mohammed — Fri, 21 Feb 2020 15:24:42 GMT

Hi all,

ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules and works fine for all other access-group access-rules

Not sure if this is a bug but, If it was a bug should have affected overall?

Best regards,

Re: ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules

M Mohammed — Mon, 05 Mar 2018 11:25:11 GMT

Re: ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules

Varun37297 — Mon, 05 Mar 2018 11:48:41 GMT

Hi,

First check what rules are applied on which interfaces. First you can check the output of :

show run access-group

This will give you on which interfaces which ACL is applied. If your ACL is there then do a:
show run | in access-list "access-list name"

Hope that helps,
Varun Rao

Re: ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules

M Mohammed — Mon, 05 Mar 2018 14:36:27 GMT

@Varun37297 thanks for your reply.

I can check that in CLI, the issue is on ASDM as mentioned earlier

Regards

Re: ASDM: packet tracer: link "show rule in access rules table" doesn't work but only for inside rules

M Mohammed — Tue, 06 Mar 2018 15:51:04 GMT

I am still in need of some lead/help in this issue, please advise