topic L2TP over IPSec in Network Security https://community.cisco.com/t5/network-security/l2tp-over-ipsec/m-p/805434#M969965 <P>Hi friends,</P><P></P><P>I managed to setup a L2TP over IPSec for ASA 8.0. </P><P></P><P>Just one question relating to this though:</P><P></P><P>Is it possible to reserve an IP address for a client, something like Use Client IP address feature on the VPN concentrator? This will help me to add static routes on the host to point to the VPN ip address (as split tunneling does not seem to be supported). </P><P></P><P>Thanks a lot</P><P>Gautam</P><P></P><P></P><P></P> Mon, 11 Mar 2019 11:07:24 GMT gautamzone 2019-03-11T11:07:24Z L2TP over IPSec https://community.cisco.com/t5/network-security/l2tp-over-ipsec/m-p/805434#M969965 <P>Hi friends,</P><P></P><P>I managed to setup a L2TP over IPSec for ASA 8.0. </P><P></P><P>Just one question relating to this though:</P><P></P><P>Is it possible to reserve an IP address for a client, something like Use Client IP address feature on the VPN concentrator? This will help me to add static routes on the host to point to the VPN ip address (as split tunneling does not seem to be supported). </P><P></P><P>Thanks a lot</P><P>Gautam</P><P></P><P></P><P></P> Mon, 11 Mar 2019 11:07:24 GMT https://community.cisco.com/t5/network-security/l2tp-over-ipsec/m-p/805434#M969965 gautamzone 2019-03-11T11:07:24Z Re: L2TP over IPSec https://community.cisco.com/t5/network-security/l2tp-over-ipsec/m-p/805435#M969967 <HTML><HEAD></HEAD><BODY><P>I think you need to use the following to accomplish this.</P><P></P><P>username foo attributes</P><P> vpn-framed-ip-address 1.2.3.4</P><P></P><P></P></BODY></HTML> Fri, 26 Oct 2007 17:22:56 GMT https://community.cisco.com/t5/network-security/l2tp-over-ipsec/m-p/805435#M969967 jstrine 2007-10-26T17:22:56Z