topic Re: IPSec Tunneling informations needed in Network Security

IPSec Tunneling informations needed

gbordeleau — Mon, 11 Mar 2019 11:04:33 GMT

I have a Watchguard Firebox 3 in a remote site and a PIX 515e on my local site and want to have them communicate each other via a IPsec Tunnel and I don't really know how to perform that!

Does anyone can tell me the path ?

Thanks

Re: IPSec Tunneling informations needed

JORGE RODRIGUEZ — Thu, 30 Aug 2007 18:29:15 GMT

Hi Guy, I could not comment on the Watchguard Firebox firewall on the how to stablish a vpn tunnel between two sites, however, you can take a look at some examples on how to configure site-to-site vpn between two pixes, read the principle on site-to-site vpn tunnel and you could get some support from the firebox vendor on how to create a site to site tunnel on their boxes.

Example of lan-to-lan vpn tunnel (CLI )

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

Example of lan-to-lan vpn tunnel (PDM )

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008055bd85.shtml

Also, for the PIX515 side ensure you have

proper VPN-3DES-AES license as this is needed to enable site to site vpn tunnels.

HTH

Jorge

Re: IPSec Tunneling informations needed

gbordeleau — Thu, 30 Aug 2007 19:00:58 GMT

Thanks Jorge,

I already have the proper VPN-3DES-AES license since I have installed a tunnel between our Europe Office and North America one. Thanks for the suggestion. I will have a look on Whatchguard side.

Re: IPSec Tunneling informations needed

JORGE RODRIGUEZ — Thu, 30 Aug 2007 19:19:57 GMT

No problem,let us know how you make out on the watchguard fw side and pix tunnel.. check this forum as there is always a posibility someone out there may have done it and post comments on this thread..

Rgds

Jorge