topic L2TP traffic in Network Security https://community.cisco.com/t5/network-security/l2tp-traffic/m-p/749882#M970534 <P>I have configure a L2TP VPN with dynamic map. My users connect perfect, but I would like to tunneled only traffic to my network, and let web and mail traffic use their internet connection. I did use "split-tunnel-network-list" but it did not work. Meanwhile, using this with VPN IPsec with Cisco client, works perfect. Any ideas? Thanks.</P> Mon, 11 Mar 2019 11:03:01 GMT edimonted 2019-03-11T11:03:01Z L2TP traffic https://community.cisco.com/t5/network-security/l2tp-traffic/m-p/749882#M970534 <P>I have configure a L2TP VPN with dynamic map. My users connect perfect, but I would like to tunneled only traffic to my network, and let web and mail traffic use their internet connection. I did use "split-tunnel-network-list" but it did not work. Meanwhile, using this with VPN IPsec with Cisco client, works perfect. Any ideas? Thanks.</P> Mon, 11 Mar 2019 11:03:01 GMT https://community.cisco.com/t5/network-security/l2tp-traffic/m-p/749882#M970534 edimonted 2019-03-11T11:03:01Z Re: L2TP traffic https://community.cisco.com/t5/network-security/l2tp-traffic/m-p/749883#M970535 <HTML><HEAD></HEAD><BODY><P>The reason I think your split tunnel is not working is because you have not configured the access list used for split tunnel properly. Also make sure you have configured split tunneling with command "vpngroup group_name split-tunnel access_list". </P></BODY></HTML> Mon, 03 Sep 2007 15:45:40 GMT https://community.cisco.com/t5/network-security/l2tp-traffic/m-p/749883#M970535 bwalchez 2007-09-03T15:45:40Z