topic Re: Active Standby OSPF in Network Security https://community.cisco.com/t5/network-security/active-standby-ospf/m-p/713569#M970829 <HTML><HEAD></HEAD><BODY><P>unfortunately dynamic routes are not replicated in failover.</P></BODY></HTML> Tue, 21 Aug 2007 22:35:53 GMT srue 2007-08-21T22:35:53Z Active Standby OSPF https://community.cisco.com/t5/network-security/active-standby-ospf/m-p/713568#M970828 <P>Hi.</P><P></P><P>I have a pair of 5520 configured for active/standby failover.</P><P>They are also running OSPF and encrypting WAN links.</P><P>From another site I can Ping/SSH to the active unit but not the standby.</P><P>I logged onto the standby via con port and found it had no routes. If I add a static route to the config both units are accesible.</P><P>Is there a way to get the OSPF routing table to update on the active and standby at the sametime?</P><P>John</P> Mon, 11 Mar 2019 11:00:36 GMT https://community.cisco.com/t5/network-security/active-standby-ospf/m-p/713568#M970828 johnroche_2 2019-03-11T11:00:36Z Re: Active Standby OSPF https://community.cisco.com/t5/network-security/active-standby-ospf/m-p/713569#M970829 <HTML><HEAD></HEAD><BODY><P>unfortunately dynamic routes are not replicated in failover.</P></BODY></HTML> Tue, 21 Aug 2007 22:35:53 GMT https://community.cisco.com/t5/network-security/active-standby-ospf/m-p/713569#M970829 srue 2007-08-21T22:35:53Z