https://community.cisco.com/t5/network-security/reg-nat/m-p/2531818#M971094 <P>Hi team,</P><P>I am kabeer, I am new to ASA 5540.In my setup, I want to configure NAT for test server in our LAN connect to core switch. From Public user they want to access my test server by using port 80 like <A href="http://192.168.1.12:80.This" target="_blank">http://192.168.1.12:80.This</A> is my scenario.&nbsp;kindly help how to perform this task through ASDM as well as CLI prompt.. I am waiting for your reply.</P> Fri, 21 Feb 2020 13:12:08 GMT Mohamed Kabeer S 2020-02-21T13:12:08Z https://community.cisco.com/t5/network-security/reg-nat/m-p/2531818#M971094 <P>Hi team,</P><P>I am kabeer, I am new to ASA 5540.In my setup, I want to configure NAT for test server in our LAN connect to core switch. From Public user they want to access my test server by using port 80 like <A href="http://192.168.1.12:80.This" target="_blank">http://192.168.1.12:80.This</A> is my scenario.&nbsp;kindly help how to perform this task through ASDM as well as CLI prompt.. I am waiting for your reply.</P> Fri, 21 Feb 2020 13:12:08 GMT https://community.cisco.com/t5/network-security/reg-nat/m-p/2531818#M971094 Mohamed Kabeer S 2020-02-21T13:12:08Z https://community.cisco.com/t5/network-security/reg-nat/m-p/2531819#M971098 <P>This is well-documented in the Cisco <A href="http://www.cisco.com/c/en/us/support/security/asa-5500-series-next-generation-firewalls/tsd-products-support-series-home.html">product support page for ASA</A> (Configuration Guides etc.).</P><P>Please see, for example, the document "<A href="http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html">Basic ASA NAT Configuration: Webserver in the DMZ in ASA Version 8.3 and later</A>". Your only difference would be you have only inside and outside to consider, not DMZ.</P> Mon, 09 Jun 2014 15:32:34 GMT https://community.cisco.com/t5/network-security/reg-nat/m-p/2531819#M971098 Marvin Rhoads 2014-06-09T15:32:34Z