topic Re: ASDM is asking for Authentication in Network Security

ASDM is asking for Authentication

reagentom — Mon, 11 Mar 2019 11:28:51 GMT

I have upgrade my Pix515E from IOS 6.2 to 8.0, and ASDM to version 602

when I am accessing the ASDM through java site or through the client sw it's asking for Authentication

Authentication is required

please login to authenticate to pix_ip

I don't have any authentication seted on the pix.

any ideas ??

Re: ASDM is asking for Authentication

JORGE RODRIGUEZ — Tue, 23 Oct 2007 03:12:26 GMT

Ahmed, the asdm authentication is the same as before upgrade by using enable password to access fw.

if you have not setup enable password console to pix and set one up

e.g

pix(config)#enable password xxxxx

Re: ASDM is asking for Authentication

reagentom — Tue, 23 Oct 2007 03:19:26 GMT

Hi jorge

I have enable password, but it's working like that

when run ASDM it will ask for password to pix then I will enter the enable password. it will accept it then another window will come asking please enter password for authentication.

Re: ASDM is asking for Authentication

pjhenriqs — Tue, 23 Oct 2007 08:47:00 GMT

It should still be the enable password.

That has to do with the Java thingy and certificates that makes you put the same password twice.

Let me know if it helps.

Re: ASDM is asking for Authentication

reagentom — Tue, 23 Oct 2007 10:37:02 GMT

no it doesn't accept the enable password

Re: ASDM is asking for Authentication

pjhenriqs — Tue, 23 Oct 2007 10:40:42 GMT

Can you share the config with us?

From the top of my head, if you have not configured any authentication on the PIX, then it should be something like username cisco and password cisco (or user pix and pass cisco).

Re: ASDM is asking for Authentication

JORGE RODRIGUEZ — Tue, 23 Oct 2007 11:14:07 GMT

In adition to Paulo's comments, can you authenticate at all when you telnet to pix or console to it? if you can get in pix enable mode via console or telnet the enable password is there, so I would think it would have to do with Java as Paulo indicated, can you use another PC to https to pix, it would be odd that enable password would have changed in the upgrade process but worth give it a try as anything is possible.

Re: ASDM is asking for Authentication

reagentom — Tue, 23 Oct 2007 11:16:06 GMT

PIX Version 8.0(2)

hostname PIX

domain-name Mecit.edu.om

enable password xxxx

names

name 10.2.2.3 ex1

name 192.168.101.0 ex323

name 10.2.0.0 ex2

name 192.168.101.4 exxx

name 192.168.101.3 xxxxx

name 192.168.101.5 xxxxx

name 192.168.101.10 xxxx

name 10.2.2.254 xxxxx

name 192.168.101.11 xxxxxx

dns-guard

interface Ethernet0

nameif outside

security-level 0

ip address x.x.x.x 255.255.255.240

interface Ethernet1

nameif inside

security-level 100

ip address 192.168.101.2 255.255.255.0

passwd xxx

boot system flash:/pix802.bin

ftp mode passive

dns server-group DefaultDNS

domain-name xxx.com

access-list inside_access_in extended permit ip Server_Network 255.255.0.0 any

access-list inside_access_in extended permit ip host xxxxx any

access-list outside_access_in extended permit tcp any host x.x.x.x

pager lines 24

logging enable

logging asdm-buffer-size 512

logging asdm warnings

mtu outside 1500

mtu inside 1500

ip verify reverse-path interface outside

ip verify reverse-path interface inside

ip audit attack action alarm drop

no failover

icmp unreachable rate-limit 1 burst-size 1

asdm image flash:/asdm-602.bin

asdm history enable

arp timeout 14400

nat-control

global (outside) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) x.x.x.x

x.x.x.x netmask 255.255.255.255

static (inside,outside)x.x.x.x

x.com netmask 255.255.255.255

static (inside,outside) x.x.x.x XX

netmask 255.255.255.255

access-group outside_access_in in interface outside

access-group inside_access_in in interface inside

route outside 0.0.0.0 0.0.0.0 X.X.X.X

route inside XXXX 255.255.0.0 192.168.101.1 1

route inside ExchSVR 255.255.255.255 192.168.101.1 1

route inside AHMED 255.255.255.255 192.168.101.1 1

route inside XXX 255.255.255.255 192.168.111.1 1

route inside XX 255.255.255.255 192.168.101.1 1

route inside XXX 255.255.255.255 192.168.101.1 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout uauth 0:05:00 absolute

dynamic-access-policy-record DfltAccessPolicy

aaa-server TACACS+ protocol tacacs+

aaa-server RADIUS protocol radius

http server enable

http XXX 255.255.255.255 inside

http XXXX 255.255.255.255 inside

http Ahmed 255.255.255.255 inside

http XXX 255.255.255.255 inside

no snmp-server location

no snmp-server contact

snmp-server community public

snmp-server enable traps snmp authentication linkup linkdown coldstart

no sysopt connection permit-vpn

no crypto isakmp nat-traversal

telnet 255.255.255.255 inside

telnet timeout 5

ssh timeout 5

ssh version 1

console timeout 0

threat-detection basic-threat

threat-detection statistics access-list

class-map inspection_default

match default-inspection-traffic

policy-map type inspect dns migrated_dns_map_1

parameters

message-length maximum 512

policy-map global_policy

class inspection_default

inspect dns migrated_dns_map_1

inspect ftp

inspect h323 h225

inspect h323 ras

inspect http

inspect netbios

inspect rsh

inspect rtsp

inspect skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect tftp

inspect sip

inspect xdmcp

service-policy global_policy global

tftp-server inside TFTP C:\TFTP-Root

prompt hostname context

Cryptochecksum:xxx

: end

Re: ASDM is asking for Authentication

reagentom — Tue, 23 Oct 2007 11:22:58 GMT

No jorge, enable password is working fine through the consol and telnet, even through ASDM also it's accepting the enable password then after that it's asking for this magic authentication password !!

I will try it with another pc and let us see how is it.

Re: ASDM is asking for Authentication

pjhenriqs — Tue, 23 Oct 2007 12:05:32 GMT

If you can telnet into the PIX, then just create a username with privilege level 15 and then try to use that to access the ASDM.

I think that solves your problem.

username X privilege 15 secret Y

Re: ASDM is asking for Authentication

reagentom — Thu, 25 Oct 2007 14:37:47 GMT

good post pjhenriqs .. thanks