topic Re: pix 515e does not start in Network Security

pix 515e does not start

jasitalymil — Mon, 11 Mar 2019 11:26:42 GMT

The boot sequence stop at this point:

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

128 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

00 11 00 11D4 2F44 Unknown Device 11

00 13 00 8086 B154 PCI-to-PCI Bridge

01 04 00 8086 1229 Ethernet 11

01 05 00 8086 1229 Ethernet 10

01 06 00 8086 1229 Ethernet 9

01 07 00 8086 1229 Ethernet 5

Then I try to power-on in monitor mode but when type the escape only test menu appear:

128 MB RAM

Testing mode menu:

1. Test floating point. 13 00 8086 B154 PC

2. Test protected mode.

3. Exhaustive Test first 640k.REWALL

*. Start all tests (Any key to stop tests).

4. Exhaustive Test high memo

C. Continue.

All test is Ok.

How do I start in monitor mode ?

Many thanks

Re: pix 515e does not start

JORGE RODRIGUEZ — Wed, 17 Oct 2007 17:06:38 GMT

Fausto, when booting you should get the option of two text messages .

e.g

"Use BRAKE or ESC to interrupt flash boot "

"Use SPACE to bigin flash boot immediately "

do you see this text at all ? if you see these two text messages use the ECS key to go into monitor mode.

Re: pix 515e does not start

jasitalymil — Thu, 18 Oct 2007 06:56:51 GMT

when I power-on the pix the only text that appear is:

ISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

128 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

00 11 00 11D4 2F44 Unknown Device 11

00 13 00 8086 B154 PCI-to-PCI Bridge

01 04 00 8086 1229 Ethernet 11

01 05 00 8086 1229 Ethernet 10

01 06 00 8086 1229 Ethernet 9

01 07 00 8086 1229 Ethernet 5

if I press Esc button during this step the test menu appear, otherwise the pix remain frozen without load image.

Thanks