topic Re: IDS 4210 in Network Security

IDS 4210

miloann2002 — Sun, 10 Mar 2019 09:11:36 GMT

Can the IDS 4210 provide blocking and alerting functions for those packets matching the defined patterns?

I was told that 4210 cannot do blocking and alterting. Is this correct? If not, does it have to do with the ways to configure it?

Re: IDS 4210

travis-dennis_2 — Thu, 16 Dec 2004 21:54:45 GMT

The 4210 cannot in and of itself block anything or provide alerts. It mionitors for events. What it can go is be logged into a PIX or a router and issue commands to the PIX or Router to block (shun) whatever malicious traffic it sees.

When used in conjuntion with VMS you can configure alerts.

I believe that all of the current models that are not end-of-sale are either in-line or in-line capable meaning that the traffic flows through them and they are capable of blocking on their own. Alerting I am not so sure about.

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/index.html

Hope this helps.

Please rememeber to rate all replies

Re: IDS 4210

miloann2002 — Thu, 16 Dec 2004 22:33:54 GMT

What is a VMS? Thanks.

Re: IDS 4210

travis-dennis_2 — Thu, 16 Dec 2004 22:49:41 GMT

http://www.cisco.com/en/US/products/sw/cscowork/ps2330/index.html

A central management software that allows for configuration and monitoring of PIX Firewalls, Cisco Security Agents , IDS and VPN devices.

Hope this helps. Thanks for the rating. So many people here get good answers and forget to rate

Travis