topic Re: Clearing PIX counters in Network Security https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811563#M977278 <HTML><HEAD></HEAD><BODY><P>pix(config)# clear interface </P><P>pix(config)# clear interface <HARDWARE_ID></HARDWARE_ID></P><P></P><P>You need to be in config mode to use these commands as shown with (config).</P><P></P><P>PIX# config t</P><P>PIX(config)#</P><P></P><P>Regards,</P><P>Vibhor.</P></BODY></HTML> Fri, 29 Jun 2007 20:55:39 GMT vitripat 2007-06-29T20:55:39Z Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811560#M977275 <P>Is it possible to clear all the interface counters? I noticed errors on my PIX's outside interface and wanted to clear them, but I couldn't find the command.</P><P></P><P>My sho int output showed:</P><P>MPA-PIX# sh int</P><P>interface ethernet0 "outside" is up, line protocol is up</P><P> 1218713296 packets input, 1646448530 bytes, 0 no buffer</P><P> Received 547517 broadcasts, 471697101 runts, 0 giants</P><P> 520078663 input errors, 47186678 CRC, 1194874 frame, 0 overrun, 4</P><P> ignored, 0 abort</P><P> 1261215020 packets output, 1272160595 bytes, 1 underruns</P><P> 0 output errors, 0 collisions, 0 interface resets</P><P> 0 babbles, 0 late collisions, 0 deferred</P><P> 0 lost carrier, 0 no carrier</P><P> input queue (curr/max blocks): hardware (128/128) software (0/101</P><P> output queue (curr/max blocks): hardware (0/70) software (0/2)</P><P></P><P>I can not find the Clear Counters command. Is there one in this PIX using IOS 6.3(5)? If so, what is the command?</P><P></P><P>Thanks.</P> Mon, 11 Mar 2019 10:37:39 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811560#M977275 flopez 2019-03-11T10:37:39Z Re: Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811561#M977276 <HTML><HEAD></HEAD><BODY><P>You can use following commands-</P><P></P><P>pix(config)# clear interface</P><P></P><P>**Clears all counters on all interfaces</P><P></P><P>pix(config)# clear interface <HARDWARE_ID></HARDWARE_ID></P><P></P><P>**Clears all counters on specified interface</P><P></P><P>Hope this helps.</P><P></P><P>Regards,</P><P>Vibhor.</P></BODY></HTML> Fri, 29 Jun 2007 20:01:04 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811561#M977276 vitripat 2007-06-29T20:01:04Z Re: Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811562#M977277 <HTML><HEAD></HEAD><BODY><P>It didn't work. This is what I tried and the response I got.</P><P></P><P>PIX Version 6.3(5)</P><P>interface ethernet0 100full</P><P>interface ethernet1 100full</P><P>interface ethernet2 100full</P><P>nameif ethernet0 outside security0</P><P>nameif ethernet1 inside security100</P><P>nameif ethernet2 dmz security50</P><P>PIX# clear interface ethernet0</P><P>Type help or '?' for a list of available commands.</P><P>PIX# clear int e0</P><P>Type help or '?' for a list of available commands.</P><P>PIX# clear int outside</P><P>Type help or '?' for a list of available commands.</P><P>PIX#</P><P></P><P>Thanks again.</P></BODY></HTML> Fri, 29 Jun 2007 20:47:11 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811562#M977277 flopez 2007-06-29T20:47:11Z Re: Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811563#M977278 <HTML><HEAD></HEAD><BODY><P>pix(config)# clear interface </P><P>pix(config)# clear interface <HARDWARE_ID></HARDWARE_ID></P><P></P><P>You need to be in config mode to use these commands as shown with (config).</P><P></P><P>PIX# config t</P><P>PIX(config)#</P><P></P><P>Regards,</P><P>Vibhor.</P></BODY></HTML> Fri, 29 Jun 2007 20:55:39 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811563#M977278 vitripat 2007-06-29T20:55:39Z Re: Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811564#M977281 <HTML><HEAD></HEAD><BODY><P>you need to be in the enable mode</P><P></P><P>config t</P><P>clear interface </P><P></P><P>Jorge</P></BODY></HTML> Fri, 29 Jun 2007 21:06:07 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811564#M977281 JORGE RODRIGUEZ 2007-06-29T21:06:07Z Re: Clearing PIX counters https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811565#M977282 <HTML><HEAD></HEAD><BODY><P>Thanks! That did it. I will rate your POST a whopping 5!</P><P></P><P><span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span></P><P></P><P>Julio,</P></BODY></HTML> Fri, 29 Jun 2007 22:18:33 GMT https://community.cisco.com/t5/network-security/clearing-pix-counters/m-p/811565#M977282 flopez 2007-06-29T22:18:33Z