topic Re: Pix 506e - Accessing PDM through Windows Server 2003 in Network Security

Pix 506e - Accessing PDM through Windows Server 2003

tcombs — Mon, 11 Mar 2019 10:36:59 GMT

I'm trying to access the PDM (v.3.0) through windows 2003 server, IE browser 7.0.

When I try to access the PDM, I get the login prompts, then it sits on the screen that says, "Loading PIX Device Manager, Please wait....." with an hour glass.

Can anyone tell me if there is a security setting that is stopping the PDM from loading?

Also, I can access the 506e using hyper terminal from this server. I can also access the PDM from other users PC's on the same network. This makes me believe the issue is a security setting on the Windows 2003 Server.

Please help!

Thanks.

Re: Pix 506e - Accessing PDM through Windows Server 2003

acomiskey — Thu, 28 Jun 2007 12:59:12 GMT

Try disabling popup blocker.

Re: Pix 506e - Accessing PDM through Windows Server 2003

tcombs — Thu, 28 Jun 2007 13:08:47 GMT

Thanks for your quick response.

Pop-up blocker is already disabled. I thought the same thing too, but it still didn't help.

Any other suggestions?

Re: Pix 506e - Accessing PDM through Windows Server 2003

acomiskey — Thu, 28 Jun 2007 13:10:56 GMT

Java is installed? Check the version.

Re: Pix 506e - Accessing PDM through Windows Server 2003

tcombs — Thu, 28 Jun 2007 13:17:06 GMT

Yes, Java is installed. Java 6 , jre 1.6.0_01

Error message in Java window is:

Exceptioni:java.security.AccessControlException:Accessdenied (java.util.PropertyPermissionjava.versionread).

Re: Pix 506e - Accessing PDM through Windows Server 2003

acomiskey — Thu, 28 Jun 2007 13:30:35 GMT

Maybe this will help?

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dde5f21

Re: Pix 506e - Accessing PDM through Windows Server 2003

tcombs — Thu, 28 Jun 2007 13:51:09 GMT

Still not working.

I uninstalled Java 6, downloaded Version 5, build 10 and I got the same result.

I found this link.

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_field_notice09186a008046c805.shtml.

It discusses the issue and suggests upgrading the PDM. I'm trying that now. To Save me time, can you tell me how to upgrade the PDM using Hyperterminal?

Re: Pix 506e - Accessing PDM through Windows Server 2003

tcombs — Thu, 28 Jun 2007 14:42:01 GMT

The link I posted above resolved the issue.

Thanks for your help!